EC

Milltek 80mm Axle-Back Exhaust | BMW G8X M3 M4 - Carbon Fibre Tips

SKU: SSXBM1173

$4633.10 $4633.10
Milltek 80mm Axle-Back Exhaust for BMW G8X M3 & M4. T304L stainless, hand-finished carbon tips, mandrel-bent piping. Direct fitment, OEM+ sound. S58 engine optimized. Fits OE system.
More info Milltek Axle Back Resonated Secondary Cat Bypass for BMW G8X M3 and M4. T304L stainless, mandrel-bent, engineered tone. Direct fitment to OE downpipes. Dyno-proven performance. - Read More
More info Milltek Axle Back Non-Resonated Secondary Cat Bypass for BMW G8X M3 M4. T304L stainless, mandrel-bent, fits OEM downpipes & Milltek systems. Direct fitment, race-focused tone. - Read More
More info Non-resonated 102mm secondary cat bypass for BMW G8X M3/M4 (G80/G82/G83). T304L stainless, mandrel-bent, OEM+ fitment to Milltek or factory systems. Track-focused performance without modification. - Read More
More info Milltek secondary catalyst bypass for BMW G8X M3 and M4 (S58). 102mm T304L non-resonated X pipe with dyno-proven power gains. Direct bolt-on to OE or Milltek axle back, no modification needed. - Read More
More info Milltek Z-Pipe secondary catalyst bypass for the BMW G80 M3 and G82 M4. Fits the Milltek axle-back. For use with OE downpipes or Milltek SSXBM1333 / SSXBM1334. Engineered for the Emotion. - Read More

Description

Milltek 80mm Axle-Back Exhaust System for BMW G8X M3 and M4 (S58 engine). Direct axle-back fitment replacing the OE rear section; OE hanger compatibility, cutting of stock system required.

Hand-finished T304L stainless steel construction with CNC-formed JET-115 carbon fiber trim tips. 3.15" & 80mm mandrel-bent primary piping engineered for optimal exhaust scavenging. OEM+ sound character tuned to the S58's naturally aggressive note without excessive drone on part-throttle driving.

  • Fits: BMW G8X M3 (2021+) and M4 (2021+)
  • Material: T304L stainless steel, hand-finished
  • Pipe Diameter: 3.15" and 80mm mandrel-bent
  • Tips: JET-115 gloss carbon fiber trim
  • Installation: Requires cutting of OE exhaust; OEM hangers reused
  • Dyno-proven improvement in mid-to-high RPM exhaust velocity

Fits OE system.

Designed and manufactured in the UK with 40+ years of performance exhaust heritage. Tested at the Nurburgring.

Key Facts

Pipe Diameter 80.00
  1.5 to 2 hours to fit (including removing OE system)
Race Product No
EMarked Yes
EMark Number M3M4G8X

System Fitment List

    • BMW > 3 Series > G80 M3 & M3 Competition S58 3.0 Turbo > 2021 and Later
    • BMW > 4 Series > G82 M4 & M4 Competition S58 3.0 Turbo > 2021 and Later

Shipping Information

This system ships in 1 box.

Box 1: 51 x 15 x 12 at 61.74lbs