Milltek Valved Cat-Back Exhaust | Ford Ranger Raptor - Brushed Titanium Tips
SKU: SSXFD450
Description
Milltek Valved Cat-Back Exhaust for the Ford Ranger Raptor 3.0 V6 Twin Turbo
The Ranger Raptor's 3.0 V6 twin turbo has a character the factory exhaust keeps under wraps. This valved cat-back opens it up: a dual valve assembly lets you run it quiet when you need to and full voice when the trail or the road calls for it. Designed as a direct bolt-on replacement for the factory exhaust, it runs a center section and dual valve assembly to LH and RH axle pipes and tailpipes, finished with two 4.5in (115mm) GT-115 tips in Brushed Titanium.
Key Features
- Valved Sound Control: a dual valve assembly gives quiet and open modes from one system, a quiet start in the morning and full volume when you want it.
- Improved Flow: 3in (76.2mm) pipe diameter throughout for consistent, unrestricted gas flow.
- Premium Materials: T304L stainless steel for long-term corrosion resistance on and off road.
- Purpose-Built Sections: RH front connecting pipe, center section, dual valve assembly, LH and RH axle pipes and LH and RH tailpipes, each engineered around the Ranger Raptor chassis.
- Dual GT-115 Tips: 4.5in (115mm), finished in Brushed Titanium.
- Remote Valve Control Ready: pair with the Milltek Active Valve Control (SSXFD453) to open and close the valves on demand.
- Direct Fit: bolt-on replacement for the factory cat-back exhaust.
Technical Specifications
- Pipe Diameter: 3in (76.2mm)
- Material: T304L Stainless Steel
- System: Valved Cat-Back
- Tips: Dual GT-115, 4.5in (115mm), Brushed Titanium
- Exit: dual rear exit
- Fitting Time: 2 to 3 hours
Compatibility
- 2023 and later Ford Ranger Raptor 3.0 V6 Twin Turbo (US market)
Why Choose Milltek?
Engineered for the Emotion.
Not sure which system is right for you? Our System Education guide explains resonated vs non-resonated, Road+ vs Race, valved systems and tip options.
Designed in Tennessee and manufactured in the UK with 40+ years of performance exhaust heritage. Tested on the Tail of the Dragon.
Key Facts
| Pipe Diameter | 76.20 |
| 2 to 3 hours to fit (including removing OE system) | |
| Race Product | No |
| EMarked | No |
System Fitment List
Shipping Information
This system ships in 2 boxes.
Similar Products
Milltek Active Valve Control | Ford Ranger Raptor
SSXFD453
Total
$455.82
$455.82
Milltek Valved Cat-Back Exhaust | Ford Ranger Raptor
SSXFD449MP
Total
$2555.16
$2555.16
Best Sellers
Milltek Race 80mm Cat-Back Exhaust | VW Golf MK8 GTI
SSXVW681MP
Total
$1448.78
$1448.78
Milltek HJS Hi-Flow Sports Cat (w/ Heat Wrap) | Chevrolet C8 Corvette Z06
SSXCH111
Total
$3321.28
$3321.28
Forge Intake Kit | 2025+ Ford Maverick and Bronco Sport 2.0T EcoBoost
FMINDK65-PLE
Total
$335.98
$335.98
MO
Milltek Secondary Catalyst Bypass (Fits to OE System Only) | Porsche Cayenne 958 Turbo 4.8 V8 (Pre-Facelift)
SSXPO182
Total
$492.20
$492.20
Milltek Secondary Catalyst Bypass Exhaust | Ford Maverick 2.0T AWD
SSXFD547MP
Total
$202.98
$202.98
Milltek Valved Axle-Back Exhaust | Dodge Charger Sixpack H/O 3.0T Hurricane
ENQ-CHG-ABV-MP
Total
$1845.32
$1845.32
Milltek Secondary Catalyst Bypass (Fits to OE System Only) | Porsche 958 Cayenne S 4.8 V8 (Non-Turbo)
SSXPO204
Total
$492.20
$492.20
Milltek Cat-Back Exhaust | Dodge RAM 1500 Rebel
SSXRAM109MP
Total
$1937.77
$1937.77
MO
Milltek Large Bore Downpipe with HJS Hi-Flow Cat - NO CEL | VW Golf MK8 R
SSXVW672MP
Total
$1837.19
$1837.19
MO
Milltek Secondary Catalyst Bypass | Audi RS3 8V Dual Catalyst Systems
SSXAU588
Total
$330.63
$330.63